Which gas springs are suitable?
Would you like assistance in determining the right gas springs for your situation? Then please fill out the online form for a hatch or panel calculation.
A hatch lies horizontally and moves to vertically. A panel hangs vertically and moves to horizontally.
We will then provide you with an offer, ensuring that we calculate the most suitable gas spring for your needs.
Fill out the form
REPLACE YOUR CURRENT GAS SPRING
Replace and order your current T-Technics gas spring easily & quickly with the article number. Order your gas springCalculate your gas spring
Order your desired gas spring in just a few steps using our configurator. Assemble a panel/hatch gas springCATALOGUE
The gas springs are custom-made for each customer and offer virtually unlimited possibilities. View catalogue
Our tips
- Check how much maximum space is available under a hatch. For most common sizes, a space of 200 to 300 mm is necessary to ensure that the gas springs can work optimally. If the gas spring is too flat, there is a possibility that the gas springs will not help open the hatch, and when closing, the hatch may fall shut at the last moment.
- Consider which fasteners you can/want to use.
- Always try to use 2 gas springs per hatch or flap, or possibly 1 in the middle. When using only 1 gas spring on the outside, there is a chance of skewing.
- If you have a non-standard construction, please send a drawing or sketch with dimensions and weights.
- Important: the better the data, the better the functioning of the gas springs.